fuyi

JG Series Air Dryer


+
  • 640.webp(4).jpg

JG Series Air Dryer

The intensified airflow drying in our factory is composed of an intensifier whose speed can be steplessly adjusted by adding a set of speed to the basic model. After the wet material enters the intensifier through the screw feeder, it is fully mixed with the hot air.

Category: Supporting equipment series

Case Description

Working principle

It can quickly remove water (mainly surface water) from easily dehydrated particles and powder materials. In airflow drying, the quality of the finished product is best controlled because the material stays in the dryer for a short time.
The intensified airflow drying in our factory is composed of an intensifier whose speed can be steplessly adjusted by adding a set of speed to the basic model. After the wet material enters the intensifier through the screw feeder, it is fully mixed with the hot air. Under the crushing and pushing of the fast rotating cutter, the material is broken into fine particles, which move to the outlet at the same time of drying, and finally in the wind. Attraction into the drying pipe, further uniform drying. Wet and heavy particles that cannot be attracted by the wind continue to be crushed and dried until they can be sucked into the drying pipe by the wind.

Main uses

This machine is especially suitable for materials with large moisture content and pasty wet materials, which can not be dried by other air drying methods.
For example, copolymers of white carbon black, vinyl acetate and vinyl chloride, cellulose acetate flocs, catalysts, C.M.C, CT-1 resin, forging gypsum, electrolytic manganese dioxide, anthraquinone ammonium sulfonate, fluorite, diatomite, silica gel catalyst, bone powder, high territory, potassium perchlorate sulfonate drugs, synthetic properties, active gluten, active white Soil, chemical filter cake, rutile drilling powder, sebacic acid, copper sulfate, aluminium sulfate, sodium sulfate, calcium phosphate, phosphate esterified starch, dyes, calcium citrate, slime, bread with a surface shape, rice bran, clay, clay cement, urea, bentonite, spherical clay, aluminium hydroxide, barium hydroxide, calcium lactate, food Products, washing high territory, cyanuric acid, gypsum paddle, lime, biological products, carbon black, calcium carbonate pulp, sludge sludge, organic chemicals, aluminum stearate, iron oxide, organic fuel, corn protein feed, wet mud, mica powder, pharmaceutical, pigments, potassium dichromate pulp, wine dregs, etc.

Technical specifications

 

Type

Evaporation water kg/h

(Calculated by surface moisture)

Installed power

Area covered m2

Height

JG 50

50

10

20

9

JG 100

100

20

32

11

JG 200*

200

31

40

11

JG 250

250

32

64

13

JG 500*

500

54

96

13

JG 1000*

1000

135

120

15

JG 1500*

1500

175

200

16

Note: The number * is calculated by steam heating for secondary drying, installed power and occupied area.

 

Online consultation


Copyright © 2023 Jiangsu Fuyi Automation Equipment Co., Ltd. 京ICP备10002622号-38   IPV6